The dry bulk industry could greatly reduce the risk of cargo contamination, surveyor non-compliance hold-ups, and charter party disputes while substantially reducing cargo hold cleaning costs, according to CLIIN, the safe and environmentally-friendly robot technology revolutionizing ship cargo hold cleaning.
CLIIN, which has so far deployed robots to shipowners’ Ultrabulk A/S, Norden A/S, J. Lauritzen A/S, and Oldendorff Carriers, claims its technology also means that the dry bulk sector could prevent the dissemination of as much as 300,000 tons of chemicals being released into the world’s oceans when cleaning cargo holds. For decades, the same methods have been used to clean dry-bulk cargo holds – with crew members using strong alkaline and acidic chemicals, scrubbing equipment, and brushes, often while suspended from rigging systems while holding high-powered pressure hoses.
The CLIIN robot system represents a departure from this outdated approach. Combining cutting-edge robot technology, its scales cargo holds while simultaneously controlling a high-pressure water cleaning system and requiring only one or two crew members –creating a raft of benefits compared to traditional methods of cleaning dry-bulk cargo holds.
Thomas Jørgensen, co-founder and director of CLIIN, commented, “For too long the dry-bulk industry has been rigidly fixed to traditional and outdated cargo hold cleaning methods that are not only time-consuming, but pose a risk to crew welfare, and expose our oceans to unnecessary exposure to millions of liters of chemicals. In securing pioneering shipowners like Ultrabulk A/S, Norden A/S, J. Lauritzen A/S, and Oldendorff Carriers, and getting their positive feedback, we are very hopeful that the rest of the dry-bulk industry will see this as an opportunity to save costs, time and improve safety, while having a positive environmental impact. CLIIN’s robot brings a seismic change in cleaning techniques and is a win-win for all parties – not only is it safer and cleaner, but also saves a lots of time and financial savings.”
Jonas Warming, Senior Optimization Manager, NORDEN A/S, added, “We are positive about the opportunities the hold cleaning robot from CLIIN offers to NORDEN A/S. Not only is the robot able to reach high areas, which are difficult for the crew to reach, but test results also show that the quality of the cleaning is improved. The water heater that is part of the robot equipment should also assist in providing a more environmentally friendly cleaning by reducing the amount of chemicals and water used. Our cooperation with CLIIN has been excellent and the feedback from our crew and port captains has been taken into account by CLIIN for robot upgrades and modifications.”
P. Martin Kondrup, Technical Manager at Lauritzen Bulkers, commented, “We are convinced of the key safety and environmental benefits of CLIIN’s cargo hold cleaning robots; also of their commercial benefits of reducing turnaround and lay time for our vessels. That’s why we chose to become directly involved in their development right from the very beginning. We already have robots installed on our vessels, and will increase the usage of the robots in the time to come.”
Anders Wulff, General Manager, Ultrabulk A/S said, “Using the CLIIN robots, we will succeed in reducing the amount of chemicals beneficial for the crew’s working environment. At the same time we expect improvement of the preservation of paint in the cargo holds – and not a least less impact on the marine environment. We are looking forward to a continued good and close corporation with CLIIN developing this concept to even wider areas onboard the vessels.”
Dexter Jeremiah, Managing Director Operations, Oldendorff Carriers added, “In the pursuit of an environmentally friendly and safer option to clean cargo holds, we have partnered with CLIIN to provide an efficient and viable solution for cleaning and maintaining cargo holds of our large bulk fleet.”
Cost Benefits. Typically, operators have to purchase thousands of liters of strong cleaning chemicals, while several crewmembers, dressed in protective material and setting up rigging and support harnesses for hard-to-reach areas will clean and scrub the hull.
The CLIIN robot system uses its innovative design to access 80%-100% of the hold –with no need for the use of dangerous chemicals and using only a few crew members, each requiring only minimal physical effort and training. The lack of need to buy chemicals, quicker cleaning time and reduced crew involvement means that there’s a return on investment with every clean completed with incremental returns as more cleanings are done.
Time Benefits and Reduced Delay Benefits. The CLIIN robot can take between four to eight hours to clean a hold depending on ships size and regardless of the condition and cargo carried, reduce cleaning time by up to 50%, compared to traditional cleaning methods. Critically, this process also requires far fewer crewmembers; reducing total work hours. When transporting exceptionally dirty cargo such as coal, concentrates or coke, time savings are even more substantial.
The CLIIN robot reduces the risk of costly consequences that can result from poorly cleaned cargo holds. The CLIIN robot greatly reduces the risk of cargo contamination, which can lead to cargo damage claims from receivers. This in turn reduces the risk of a cargo hold being rejected by inspectors and triggering delays and charter party disputes.
Safety and Environmental Benefits. Safety of crew has always been a number one concern for ship owners, operators and managers, while the shipping industry is being increasingly concerned with reducing its environmental impact.
The CLIIN robot represents a safer and more environmentally friendly approach to cleaning cargo holds. As the CLIIN robot almost eliminates the need for strong chemicals, it means fewer crewmembers being exposed to these toxic substances. Furthermore, it can mean that millions of liters of harmful chemicals will no longer be emptied into the ocean, potentially doing significant harm to the marine ecosystem.
The risk to crewmembers being injured is also greatly reduced due to fact that there is no need to suspend crewmembers on harnesses from the hatch coaming. Furthermore, there is no need for costly and burdensome chemical safety suits when using the CLIIN robot.
CLIIN is a global innovative technology company serving the international maritime sector, and the owners of a revolutionary ship cargo hold robot-cleaning technology. As well as its presence in Denmark, CLIIN, with 20 employees globally, has operations in the key maritime markets of Greece and Singapore.
Headquartered in Denmark, CLIIN’s robot cargo hold cleaning technology has been successfully deployed to four of the world’s leading shipowners: J. Lauritzen A/S, Norden A/S, Oldendorff Carriers, and Ultrabulk A/S. Founded in 2016, CLIIN has invested over €4 million in R&D, and has long terms goals of diversifying its product range.
CLIIN’s technology solutions are developed to resolve issues and challenges facing the shipping sector that have not been adapted and improved for many years or have been over-looked. CLIIN cares passionately about safety and the environment, and strives to develop technologies that improve the industry’s safety record and environmental impact – as well as delivering a strong commercial rationale.